英國Ossila紫外線臭氧清洗機E511 進口紫外線臭氧清洗機

英國Ossila紫外線臭氧清洗機E511 進口紫外線臭氧清洗機
英國Ossila紫外線臭氧清洗機，廠家直接訂貨、原裝正品、交期準時！！整機享受一年保修！

訂購留言

分享到：

只用于動物實驗研究等

英國Ossila紫外線臭氧清洗機E511 進口紫外線臭氧清洗機

UV Ozone Cleaner Applications

Examples of applications for UV Ozone cleaners:

Surface cleaning
Preparation for thin film deposition
UV curing
Surface sterilization
Cleaning of AFM/STM probes
UV chemical reactions
Cleaning of optical components
Improving surface hydrophilicity
Removal of surface monolayers
Oxidation of surfaces

Examples of materials that can be cleaned:

Quartz
Silicon
Silicon Oxide
Silicon Nitride
Gold
Nickel
Aluminium
Gallium Arsenide
Alumina
Glass
Stainless Steel

英國Ossila紫外線臭氧清洗機E511 進口紫外線臭氧清洗機

The images below shows the impact of UV ozone treatment on a substrate to improve surface hydrophilicity.

Low energy substrate surface before UV Ozone cleaning High energy substrate surface after UV Ozone cleaning Water drop on OTS-treated silicon substrate (300 nm SiO₂ on surface) before UV ozone cleaning (left) and after 10 minutes UV ozone cleaning (right).

UV Ozone Cleaner Features

Ossila's UV ozone cleaner has the following features:

Lowest-cost UV Ozone cleaner
120 mm x 120 mm sample stage
Maximum sample height of 14 mm
Simple loading-unloading using a drawer
Safety interlock for sample drawer
LCD display showing 'time passed' and 'time left'
60-minute timer
High intensity UV light source
High temperature thermal cutout
Solvent-free cleaning of samples
Provides ultra-clean surface

UV Ozone Specifications

UV lamp type	Synthetic Quartz UV Grid Lamp
UV lamp dominant wavelengths	185 nm and 254 nm
UV lamp dimensions	100 mm x 100 mm
UV lamp supply	4000 V, 30 mA
UV lamp lifetime	T80 (2000 hours); 8-10 years of standard daily use
Power supply	230 V, 0.6 A , 50 Hz // opt. ( 110 V, 1.2 A, 60 Hz )
Max run time	59 minutes 59 seconds
Safety features	Safety interlock, High temperature warning, thermal cutout
Substrate tray size	120 mm x 120 mm
Maximum recommended substrate size	100 mm x 100 mm
Overall Dimensions	Width 204 mm Height 227 mm Depth 300 mm